201 stainless Steel Sheet Embossing Surface 10mm 12mm Stainless Steel Checkered Plate 201

Stainless steel features

The selection of stainless steel plates should consider the operating conditions, such as manual operation or automatic operation, the performance and type of the hot press, and the quality requirements for the pressed material such as hardness and gloss. Economic calculations should also be considered. Each time a newly polished steel plate is required to be able to produce a lower quality decorative plate.

In addition, when choosing the most reasonable thickness of the steel plate, its service time, quality, and stiffness should be considered, and at the same time, the strength requirements of the plate when it is compressed; thermal conductivity; pressure distribution, and the format specification of the pressure plate.

If the thickness of the steel plate is not enough and it is easy to bend, it will definitely affect the production of decorative panels. If the thickness is too large and the steel plate is too heavy, it will not only increase the cost of the steel plate, but also bring unnecessary difficulties to the operation. At the same time, the margin should be left when the stainless steel plate is processed or used. The thickness of the copper plate is not absolutely consistent, but the thickness of the same steel plate should be as consistent as possible. Generally, the thickness tolerance of the medium-sized sawing plate is 0.05-0.15mm. If the requirements are too strict, the grinding cost will also increase accordingly. Generally, it is a steel plate with big tensile strength and big hardness. The greater your resistance to mechanical damage, the longer the durability people, but the cost for grinding and processing is also higher.

Product of description

physical properties

The overall heat transfer coefficient of a metal depends on other factors besides the thermal conductivity of the metal. In most cases, the heat dissipation coefficient of the film, the scale and the surface condition of the metal. Stainless steel keeps the surface clean, so it transfers heat better than other metals with higher thermal conductivity. Liaocheng Suntory Stainless Steel provides 8. Technical standards for stainless steel plates High-strength stainless steel plates with excellent corrosion resistance, bending performance, toughness of welded parts, and stamping performance of welded parts and their manufacturing methods. Specifically, C: 0.02% or less, N: 0.02% or less, Cr: 11% or more and less than 17%, appropriate content of Si, Mn, P, S, Al, Ni, and satisfy 12≤Cr Mo 1.5Si≤ 17. The stainless steel plate with 1≤Ni 30(C N) 0.5(Mn Cu)≤4, Cr 0.5(Ni Cu) 3.3Mo≥16.0, 0.006≤C N≤0.030 is heated to 850～1250°C, and then carried out at 1°C/s Heat treatment for cooling above the cooling rate. In this way, it can become a high-strength stainless steel plate with a structure containing more than 12% martensite by volume, high strength above 730MPa, corrosion resistance and bending performance, and excellent toughness in the welding heat-affected zone. Reusing Mo, B, etc. can significantly improve the stamping performance of the welded part.

Oxygen plus gas flame cannot cut stainless steel plate because stainless steel is not easy to be oxidized.

Product Show

FAQ

Q:May I have an inspection of your factory?
A:Sure, you're welcome any time.

Q:Can I personalize the product?
A:The minimum order quantity is more than 10 tons, we can meet your personalized requirements.

Q:How I believe you?
A:We consider honest as the life of our company, Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.

Q:What is your delivery time?
A:We are based on the quantity of products to determine the delivery time, you can consult us for the answer.